Description

Protect your wood project with our best-selling, original product.

Original Sealer Countertop

ORIGINAL Sealer & Semi-Gloss Finish is always a sealer. For a semi-gloss finish, use it for all coats. For a different sheen, top coat sealer with two coats of one of the following finishes:

This is where related products would be displayed.

Our oldest and truly “original” product, since 1910.
Like all of our Tung Oil formulas, 90% of the resin portion of the formula is from renewable, natural resources.
Waterlox® ORIGINAL Sealer & Semi-Gloss Finish penetrates deep into wood fibers to create a waterproof barrier, while forming a protective yet elastic film that is durable against common household use and foot traffic.
Easier to maintain than other interior clear or surface finishes.
Non-toxic when dry and fully cured.
Handcrafted in small batches in Cleveland, Ohio by a 4th generation, family-owned company.
Available in semi-gloss sheen.
Available in gallon, quart and 2 ounce sizes.
Waterlox ORIGINAL Sealer & Semi-Gloss Finish – formerly known as Waterlox Transparent, and Waterlox Original Sealer/Finish.

Use on interior wood surfaces including floors, countertops, doors, cabinetry, woodwork, tables, furniture, bar tops, picture frames and various woodworking projects.
Great on porous interior surfaces such as slate, brick, stone, tile or cement to seal and prevent chalking and dusting*.
Provides exceptional adhesion to oily, dense, exotic woods like teak, rosewood and ipe.
One quart of ORIGINAL Sealer & Semi-Gloss Finish covers 125 square feet per coat (500 square feet per coat for one gallon). One quart of the Universal Tung Oil Sealer (UTOS) covers 600-800 square feet per coat. For more details, view our coverage guide. No thinning required.
Minimum dry time of 24 hours between coats. Poor ventilation, high humidity or cool temperatures may increase dry times.
Learn more about our Waterlox® ORIGINAL Sealer & Semi-Gloss Finish product.

* Once the project is completed, removing the finish can be very difficult as Waterlox® will alter the appearance of porous substrates. Apply all intended coats to a small, inconspicuous area or scrap piece of substrate from the project and allow to dry properly prior to the actual application. Final color effect is always influenced by the texture, porosity, and by the method of application and will be difficult to reverse once finished. For slate, brick, stone and concrete, you may need only one coat to penetrate and seal.